Save Time - Save Dollars - Stay on Spec. - Safer Operation

The days of waiting for specialized heating services are over! With Hot Coils ® you have your own heating crew always on standby.

Hot Coils® offer you a whole new technology for pre-weld and post weld heat treatment as well as heat measurement and recording equipment.

Hot Coils® Pre-Weld high efficiency electrical resistance heating system is designed to; increase your welding productivity, improve weld quality plus provide a safer, cleaner work environment while producing major savings. Hot Coils® pre-weld products will easily handle all your pipe heating and hydrocarbon bake-out needs. In addition their low power requirement, 110volt, 15 amp. design means you can use them anytime, anywhere.





Hot Coils® Data Logger ...with its integral LCD display is easily programmed to electronically track pipe temperature which can then be downloaded through a USB connection. This allows you to plot a temperature profile, eliminating the need for temperature sticks while providing Quality Assurance an ID chart for each weld.





Quick and Easy Set-up:
Only 6 in. (150 mm) long and weighing in as little as 6 lbs. (2.7 kg.) Hot Coils®, part of your welders toolbox, can be easily set in place with your existing labor force. No need to hire specialized and expensive set-up crews resulting in time and dollar savings. Also eliminates the need to lug heavy propane tanks around the job-site to feed a Tiger Torch.

Low Voltage Requirements:
Hot Coils can be plugged into any 110/120 volt, 15 amp. power outlet. This allows you to utilize existing utility power or in remote applications plug into generators or welding machines. This eliminates the need and high cost of "High Voltage Generator Trucks".

Adjustable Heat:
Hot Coils® feature an adjustable thermostat which allows you to preset the specified temperature of the weld joint meeting welding procedures and specification every time.

Accurate Heating:
The Hot Coils® thermostat holds the joint at the pre-set temperature. With an accuracy of +/- 2.5˚F it helps you maintain welding procedures and stay on specification every time.

Rapid Heating Cycle:
Depending on ambient temperature and pipe thickness, Hot Coils® can reach a maximum internal temperature of 550˚F (286˚C) within 20 minutes. This allows for a quicker welding cycle and increased productivity.

Uniform Heat:
Hot Coils® provide even heat throughout the entire joint. And unlike flame heating there are no "cold spots" in those hard to reach areas. Temperature can be charted to ensure compliance to welding specifications.

Versatility:
In addition to pipe pre-heating, Hot Coils® can also be used for Hydrocarbon bake-out applications. Simplifies the welder’s tool-box requiring only one tool to do multiple jobs.

Multi Tasking:
Using additional Hot Coils® reduces welder down-time. Hot Coils can be installed on the next joints to be welded, preheating them to be at the ready when the welder is. Maximizes welder efficiency and reduces down-time keeping you on or ahead of schedule.

Always On Spec.:
Can be used with Hot Coils® Data Loggers, chart recorders or any other recording device. Helps ensure you stay on spec. and provides quality assurance with a temperature profile chart of each weld.

Thinking Ahead:
Hot Coils® can be used in conjunction with electrical timers. Get a jump start on the day by having the coils preheat the weld joints before your crew starts the next shift.

Meets All Standards:
Hot Coils® have been approved with a zone 1 division 1 rating by UL, CSA and CUS regulatory agencies. This assures that you are using a product that has met the most stringent safety requirements.

Safe Operation:
Hot Coils® at maximum reach a low 125˚F (52˚C) outside shell temperature. Unlike open flame heating this reduces the chance of accidental burns.

Use Almost Anywhere:
Hot Coils® requires only low voltage and amperage to operate. No uncontrolled open flame. Safer and more environmentally friendly, increases the area in which the Hot Coils® can be operated in. Also eliminates the need to have a fire watch crew standing by.

Breath A Little Easier:
Operated by clean electrical energy Hot Coils® eliminate the dangers of open flame, explosive gasses and high heat hazards associated with propane. The operator is not exposed to the exhaust gasses or the burning of any pipe coatings or oil film.

All The Angles are Covered:
Hot Coils® can be used in horizontal, vertical or at any angle in between. Regardless of the direction of the pipe run, in-position welding becomes a breeze.

Uncluttered Work Space:
Hot Coils® only require low voltage wiring (extension cords). This eliminates high voltage electrical cable hazards in the work area.

Sized For The Job:
Hot Coils® are available to fit standard 4, 6, 8, 10 and 12 in. dia. pipe. This provides you with increased versatility by having the right tool in your tool box to handle any job.

Long Term Reliability:
Hot Coils® are manufactured with a tough stainless steel outer shell. Provides protection and helps improve the service life of the product allowing you a greater return on your investment.

Hot Coils®

Saving Time - Saving Dollars - Staying on Spec. - Safer Operation

Hotcoils Features



Hotcoils Specifications



Hotcoils Data Logger



Hotcoils vs. Flame



Hotcoils vs. High Voltage

Innovation is just a click away!

Browse through our website or use the online contact form to ask us a question.